General

 

PLEASE, BEFORE YOU PERHAPS WISH TO PRINT THIS FILE… ASK YOURSELF IF YOU  COULD POSTPONE THAT THOUGHT !

IT MIGHT STRIKE YOU AS  SMALL AND SYMBOLIC GESTURE FROM YOUR BEHALF, BUT EVERY ACTION COUNTS. WE MUST START FROM SOMEWHERE !

PLANET THAT IS OFTEN CALLED AS WATER PLANET IN 2006. HAS 3% OF DRINKABLE WATER (NO TYPO) ISN'T THAT IRONIC?

WE NEED AIR EVEN MORE THEN WATER, CONSIDER THAT EVERY PAPER SAVING ACTION CONTRIBUTES TO LESS PAPER CONSUMPTION, THUS THREES AS SUCH !

RESPONSIBILITY IS THE ESSENCE IF YOU CONSIDER NEXT GENERATIONS, THOSE OF YOUR OWN KIN, YOUR CHILDREN, THOSE THAT INHABIT THE WOODS : ANIMALS.

SO READ THIS SCREEN IN NORMAL 030 MODE OR SAVE IT AS WEB PAGE ON YOUR OWN OS MACHINE.

 

IMPORTANT : Don't ask assistance from me if you didn't read this !

 

Material Overview :

The CT60 offers two modes : 030 and 060. The 030 mode (CT60 OFF) permits to keep a Falcon 100% as origin. With 060 mode (CT60 ON), it is too possible to boost the Falcon motherboard with some solders. 

Features (in MHz) table of the different settings

	CT60 OFF	CT60 ON	CT60 ON
FITTING	SOLDERS & NO SOLDERS	NO SOLDERS	SOLDERS
CPU	030@16	060@66	060@66
FPU	882@16 or 32	060@66	060@66
BUS (F30/CT60)	16/OFF	16/66	25/66
DSP / VIDEL	32	32	50

The modes CT60 ON with solders at 50 MHz are available in VGA standard & extended résolutions. To use the RGB & ST-MONO (SM12x/144), a 32 MHz clock must be added on the VIDEL pin#14 input (EXT). This clock should be taken from the 32 MHz oscillator at left of  the DSP.

 

Software Overview :

The Hard Disk boot must be done with HD Driver 7.60 (or higher) or  CECILE 2.18 (or higher). Don't use the old HDD drivers like AHDI, ICD & SCSITOOLS (HUSHI) if you want to not destroy your HDD partitions !

Cecile is not working with SCSI HDD and 060 !

 

External software :

AUTO Folder

Here is the order you must respect into the AUTO folder (use AUTOSORT prg). This is only indication because some of them can't be together !

- XBOOT

- MENU

- MAGXBOOT

- SETENV

- METADOS

- EXTENDOS

- DRVIN (replaces Fpatch2)

- SCC

- RSVX

- STING

- FDI_INIT

- JPEGD

- NVDI

- CKBD

- SPEEDOGDOS

- WDIALOG

- CENTSCREEN

- SLECTRIC

- UISIII

- FREEDOM

- LETEMFLY

- DESKPIC

- NOSYSTEM

- RDEBUG

- MINT

 

CPX

FILEINFO.CPX is an utility permitting to adjust 3 bits of program configurations and accessories: FastLoad, TT-Ram (Mem) and TT-Ram (Prg). 

The FastLoad bit prevents the system to erase all the memory to every launching of the software, that can take time with 64 MB of Fast-Ram.

The TT-Ram bit (PRG) loads the program in Fast-Ram, attention to the software audio and video (by example : CUBASE AUDIO will not output sounds if the PRG bit is set ! But you should set the MEM bit).

The TT-Ram bit (MEM) fact that the program will make this allowances memory in Fast-Ram, same remark for the program.

 

PATCHS

Some software need a patch or to be replaced by a patched version. It is the case with Cubase Audio that needs a patch present in the software package.