18.19 Matgraph C110ZV Matgraph C110ZV
Anschlußbelegung lt. Matrix-Handbuch für Matgraph
C110ZV:
Pin 1 Rot (Analog)
Mein Adapter ist folgendermaßen belegt:
Matrix Monitor 1 1 2 2 3 3 4 13 5 14 6 6 7 7 8 8 9 5 und 10 Pin 4,9,11,12 und 15 an der DB 15 Buchse des Adapters sind nicht
belegt. Am Monitorstecker fehlt nur Pin 9 (Nicht benutzt).
Tech information on a range of Matrix cards (dated February
1991)
MATGRAPH C32
For Mega-ST
Power supply: PIN-1 +5V (red) PIN-2 +5V (red) PIN-3 GND (blk) PIN-4 GND (blk) PIN-5 GND (blk) PIN-6 +12V (blu) not needed 9-pin Socket: Pin-1 red (analog) Pin-2 grn (analog) Pin-3 blu (analog) Pin-4 H-sync (TTL) Pin-5 V-sync (TTL) Pin-6 GND Pin-7 GND Pin-8 GND Pin-9 GND
Videofreq 28/25/16 MHz
For Mega-ST
Power supply: see C32
9-pin Socket: see C32, pin 2 = analog with composite sync
Videofreq 125/110/64/32/16 MHZ
MATGRAPH CoCo (color controller)
For Mega STE or TT (VME)
9-pin socket: see C32
Videofreq 50/28/25/16 MHz Note that later versions could have
50/28.8/25/14.4/12.5 MHz
MATGRAPH MoCo (Monochrome controller)
For Mega STE or TT (VME)
9-pin plug: pin-1 Video+ (ECL) pin-2 GND pin-3 HSync- (TTL) pin-4 VSync- (TTL) pin-5 free pin-6 Video- (ECL) pin-7 GND pin-8 GND pin-9 free
MATGRAPH MiCo (mixed controller)
For Mega STE or TT (VME)
9-pin socket for color screens, see CoCo
Videofreq 110(125)/50/28/25/16 MHZ
For VME bus
for VME bus,
Matrix TC1208/E offers also 15 and 16 bit modes.
Copyright © Robert Schaffner (doit@doitarchive.de) Letzte Aktualisierung am 23. Mai 2004 |