[PageStream 2 document F030MEM.DOC: 8.50 x 11.00 in, 23073 objects]

--- Page 1 ---
[9091 drawing objects, see F030MEM.DOC.p001.svg]

FALCON030
Memory Board Installation Kit


Kit Contents

4 Megabyte Memory Board P/N CA401292-002
or
14 Megabyte Memory Board P/N CA401294-001


Installation

1.	Turn the unit over and remove the seven screws holding the top cover in place. Remove the top cover and keyboard assembly.

Top
Cover

Keyboard
Assembly

Bottom
Cover

Screws

Screws

--- Page 2 ---
[11129 drawing objects, see F030MEM.DOC.p002.svg]

2.	Unplug the Speaker Assembly and remove the nine screws holding the Floppy Disk Shield. Remove the Floppy Disk Shield.

Screws

Speaker
Assembly

Floppy
Disk
Shield

Bottom
Cover

3.	Remove the memory board that is currently installed in the unit. Set it aside for future use.

Memory
Board

--- Page 3 ---
[2828 drawing objects, see F030MEM.DOC.p003.svg]

4.	Replace the memory board with the one contained in the kit. Be sure the connectors on the main PCB and the memory board are lined up before pressing the memory board on to the main PCB.

Memory
Board

5.	Replace the Floppy Disk Shiel and speaker. Plug in the speaker and replace the top cover.