|
|
13.8 SQ555 Error
Errorcodes der SQ555
Number of LED Blinks Error Deskription
GREEN RED/AMBER
==============================================================
0 1 Too many files created/wrong cartridge
0 2 Maintanance track read error
0 3 Maintanance track write error
0 4 Drive not ready
0 5 No spare maintanance sectors
0 6 Cartridge write protect
0 7 Self test FAT/FED sector full
1 1 EPROM failed checksum test
1 2 Microcontroller internal RAM failure
1 3 Scratchpad RAM failed
1 4 Self test seek error
1 5 Seek error
1 6 Read Error
1 7 Write Error
2 1 Disk controller (SERDES) failed
2 2 SERDES Sequencer RAM test 1 failed
2 3 SERDES Sequencer RAM test 2 failed
2 4 R/W buffer RAM address register failed test 1
2 5 R/W buffer RAM address register failed test 2
2 6 R/W buffer RAM failed test 1
2 7 R/W buffer RAM failed test 2
3 1 R/W buffer RAM port 0 failed
3 2 Amber/Red/Green LEDs port failed
3 3 R/W buffer RAM port 2 failed
3 4 Self test write error (scan process)
3 5 Invalid self test number
4 1 Spindle motor failed to start
4 2 Spindle motor failed to spin up to speed
4 3 Spindle motor spins too fast
5 1 Power supply failure (voltage out of spec)
5 2 Spindle motor speed abnormal <> 0.5% or no servos
5 3 No servos detected after spin up
5 4 No servos found head 0 (bad head)
5 5 No servos found head 1 (bad head)
6 1 ADC calibration failure
6 2 ADC high current failure
6 3 ADC low current failure
off flashing Failed power-up sequence; possible defective
cartridge; heads not loaded; possible defective
drive.
Quelle:
Copyright © Robert Schaffner (doit@doitarchive.de) Letzte Aktualisierung am 23. Mai 2004 |
|
|
